Description
Overview
The stainless steel floor-standing fume hood puts cleanroom discipline at floor scale: a brushed 201/304/316 SUS body over a 304 stainless interior and three-section baffle, with a full-height base and a standing workstation. Food testing, pharmaceutical support and industrial QC run here — anywhere the chemistry is real but the surfaces must wipe down and stay compliant.
Exhaust volumes run 1065-1729 m³/h by width, with stainless-compatible duct options for corrosive-adjacent service. The tempered glass sash, LED lighting and LCD panel match the steel series hardware, so an all-stainless laboratory keeps one look, one spare-parts list and one maintenance routine.
Grade selection follows the service — 201 economy clean duty, 304 standard, 316 for chloride exposure — and the worktop comes in stainless, ceramic or epoxy to match the protocol.
Key features
- 201/304/316 brushed SUS body. cleanroom-grade finish over the full floor-standing height
- 304 stainless interior. liner and three-section baffle that shed nothing and wipe clean between protocols
- Full-height base cabinet. reinforced stainless base with chemical-resistant worktop options
- Tempered glass sash. 5mm vertical rising pane, counterweighted, cycle-tested
- LED lighting and LCD panel. shadow-free chamber visibility with splash-proof controls
- Stainless duct options. exhaust runs matched to corrosive-adjacent service
- ASHRAE 110 verification. face velocity mapped before dispatch; SEFA 1 construction
Specifications
| Model series | Stainless floor-standing (201 / 304 / 316) |
|---|---|
| Working widths | 1200mm · 1500mm · 1800mm (4 / 5 / 6 ft) |
| Overall dimensions | 1200/1500/1800 × 850 × 2350mm (full height with base) |
| Body | 201/304/316 stainless steel, brushed |
| Liner | 304 stainless steel |
| Baffle | 304 stainless, three-section |
| Sash | 5mm tempered glass, vertical rising, synchronous belt counterweight |
| Base cabinet | Full-height stainless, reinforced |
| Lighting | High-brightness LED |
| Electrical | LCD control panel, splash-proof sockets |
| Exhaust volume | 1065 m³/h (1200mm) · 1397 m³/h (1500mm) · 1729 m³/h (1800mm) |
| Face velocity | 0.4-0.6 m/s at the working opening |
| Worktop options | Stainless steel / ceramic / epoxy resin |
| Compliance | ASHRAE 110 · SEFA 1 · SEFA 8M · ANSI/AIHA Z9.5 |
Where you would install it
- Food and beverage QC. hygienic stainless for food chemistry and contaminant testing
- Cleanroom-adjacent chemistry. wipe-down capture where particulate discipline matters
- Pharmaceutical support. sterile-adjacent process chemistry at standing scale
- Industrial QC. corrosion and surface testing with clean, compliant surfaces
Reviews
There are no reviews yet.