CO2 and tri-gas chambers for cell culture, from 80 L water-jacketed cabinets to 934 L reach-in units, selected by gas sensor technology, sterilisation cycle, humidity recovery and stacking strategy.
Laboratory equipment
SKU: LI-AIR-JACKETED-CO2-INCUBATOR-GROUP
SKU: LI-CO2-INCUBATOR-DRY-HEAT-STERILIZATION-GROUP
SKU: LI-MULTIGAS-INCUBATOR-GROUP
SKU: LI-STACKABLE-CO2-INCUBATOR-GROUP
SKU: LI-WATER-JACKETED-CO2-INCUBATOR-GROUP
Select a product to view its specifications, available options and technical documents.
Application-led selection for real laboratory workflows.
Adherent and suspension cell culture needs 5 % CO2 buffered against bicarbonate media. Work at physiological oxygen — stem cells, organoids, hypoxia studies — needs O2 control down to 1 %, which a tri-gas unit provides and a CO2-only cabinet cannot.
An IR sensor reads CO2 directly and does not drift with humidity or temperature; a thermal conductivity sensor infers CO2 from a mixed signal and needs recalibration when setpoints change. The difference shows up as recovery time after a door opening and as drift between services.
A 180 °C dry-heat cycle sterilises chamber surfaces without removing shelves or sensors; a UV lamp only treats the air and exposed surfaces while it runs; a 90 °C humid cycle is a decontamination step. These are not equivalent, and the cycle length decides how long the chamber is out of service.
A water pan recovers humidity slowly and is a contamination harbour; an active humidity system recovers in minutes but adds a reservoir to maintain. Stacking two chambers doubles capacity on one footprint, but the upper unit must remain serviceable and the gas supply must reach both.
Adherent and suspension cell culture needs 5 % CO2 buffered against bicarbonate media. Work at physiological oxygen — stem cells, organoids, hypoxia studies — needs O2 control down to 1 %, which a tri-gas unit provides and a CO2-only cabinet cannot.
An IR sensor reads CO2 directly and does not drift with humidity or temperature; a thermal conductivity sensor infers CO2 from a mixed signal and needs recalibration when setpoints change. The difference shows up as recovery time after a door opening and as drift between services.
Product names, model numbers, SKUs and option identifiers keep quotations, orders and internal records aligned.
Documentation and inspection requirements are confirmed against the selected product and order.
Compare the specifications that determine application fit and acceptance.
Selection guidance for laboratory, quality and procurement teams.
QUALITY CHARACTERISTICSConfirm the exact requirement before orderingSelection guidance for laboratory, quality and procurement teams.
QUALITY CHARACTERISTICSConfirm the exact requirement before orderingSelection guidance for laboratory, quality and procurement teams.
QUALITY CHARACTERISTICSConfirm the exact requirement before orderingSelection guidance for laboratory, quality and procurement teams.
QUALITY CHARACTERISTICSConfirm the exact requirement before orderingDefined specifications and order-level checks.
Documents support selection and compliance.
Configurations for bench, pilot and production needs.
Guidance on specification and application matching.
Support for recurring and project orders.
Shipping requirements reviewed for each order.
Choose the format that suits your application, workload and handling requirements.
| Type | Capacity / Option | Material / Specification | Suitable Application | Storage / Handling |
|---|---|---|---|---|
| CO2 and O2 range | By selected product | Product-specific configuration | Confirm with our team | Follow product guidance |
| IR versus thermal conductivity sensor | By selected product | Product-specific configuration | Confirm with our team | Follow product guidance |
| Sterilisation cycle | By selected product | Product-specific configuration | Confirm with our team | Follow product guidance |
| Humidity recovery and stacking | By selected product | Product-specific configuration | Confirm with our team | Follow product guidance |
Follow the product manual and site procedures for safe installation, use and maintenance.
Confirm model, options and supplied components.
Read installation and safety instructions before use.
Confirm space, utilities and operating conditions.
Follow cleaning, inspection and maintenance guidance.
Products frequently compared within this catalog.
SKU: LI-WATER-JACKETED-CO2-INCUBATOR-GROUP
SKU: LI-CO2-INCUBATOR-DRY-HEAT-STERILIZATION-GROUP
Add category-specific video covers, titles, durations and video URLs in the Videos ACF section.
Tell us your required products, specifications and quantities. Our sales team will contact you with suitable supply options.